Shingle and Underlayment Order Sheet for the Supplier

Turns your roof measurements and your own coverage numbers into a clean order sheet you can send to your supplier.

RooferHome Services and Trades✓ Checkedv1.0

Before and after

BEFORE · what the owner typed

need an order sheet for glenworth roofing supply, attn Ernesto Kelley, his number 402-555-0185. job is Emily Hudson, 1097 Elderworth Rd, Aspenland. our company is Foxworth Roofing, Elliot Hicks, 402-555-0184. tear off and reshingle. measured surfaces already with pitch: front 1150, rear 1150, garage 640, porch 210 sq ft. shingles are Tamarack Duraline architectural in Weathered Slate, 3 bundles a square, 10% waste on shingles and underlayment. synthetic underlayment rolls cover 1000 sq ft. ice barrier on eaves and valleys, eave 150 ft, valleys 40 ft, rolls cover 65 ft. rake is 60 ft. starter bundles cover 100 ft. ridge is 62 ft, no hips, ridge cap bundles cover 30 ft. drip edge 10 ft pieces on eave and rake. nails, 1 box per 15 squares. 3 pipe boots. drop in the driveway, ground drop.

AFTER · what the skill produced

MATERIALS ORDER SHEET

To: Ernesto Kelley, Glenworth Roofing Supply, 402-555-0185
From: Elliot Hicks, Foxworth Roofing, 402-555-0184
Job: Emily Hudson, 1097 Elderworth Rd, Aspenland (tear off and reshingle)
Delivery: Driveway, ground drop

Roof area: 1,150 + 1,150 + 640 + 210 = 3,150 sq ft (31.5 squares)

Line items

Tamarack Duraline architectural shingles, Weathered Slate: 104 bundles. 31.5 squares plus 10% waste = 34.65 squares, times 3 bundles per square = 103.95, rounded up.
Synthetic underlayment: 4 rolls. 3,150 sq ft plus 10% waste = 3,465 sq ft, divided by 1,000 per roll = 3.47, rounded up.
Ice barrier: 3 rolls. 150 ft eave plus 40 ft valley = 190 ft, divided by 65 ft per roll = 2.92, rounded up.
Starter strip: 3 bundles. 150 ft eave plus 60 ft rake = 210 ft, divided by 100 ft per bundle = 2.1, rounded up.
Ridge cap: 3 bundles. 62 ft ridge divided by 30 ft per bundle = 2.07, rounded up.
Drip edge, 10 ft pieces: 21 pieces. 210 ft of eave and rake divided by 10 ft.
Roofing nails: 3 boxes. 31.5 squares divided by 15 squares per box = 2.1, rounded up.
Pipe boots: 3.

Notes: Waste of 10% is applied to shingles and underlayment only. Everything is rounded up to whole units. Please confirm coverage per unit against your current product data and tell us if anything is out of stock.

Questions for the owner

What delivery date and time should go on the sheet?
What is your account number or PO number with Glenworth Roofing Supply?
Do you want roof vents or ridge vent added to this order?

What it does

Turns your roof measurements and your own coverage numbers into a clean order sheet you can send to your supplier. It shows the quantity for each item and how it was figured, so you can check it before you send it.

Use it when: Use when a roofer needs to turn job measurements into a materials order sheet for the supplier, such as "make the order sheet," "figure out how many bundles," "order shingles and underlayment," or "send the supplier a materials list."